View PT-EX610_8880455.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

pr oduct name : lcd projectors s pec f ile pr oduct number : pt - ex610/ex610l 1/16 as of august 2014. specifications and appearance are subject to change without notice. sfl14m018
main unit power supply power consumption o ptical system lcd panel panel size display method pixels pixel configuration lens lamp scr een size brightness* 2 center -to-cor ner uniformity* 2 contrast* 2 resolution scanning fr equency displayport/hdmi/dvi-d rgb yp b p r (yc b c r ) video/yc o ptical axis shift keystone corr ection range installation built-in speaker size o utput power 100? 240 v ac, 5 0/60 hz dichr oic mirr or separation/prism synthesis system tr anspar ent lcd panel ( 3, r/g/b) stripe power ed zoom/focus lens (1.7? 2.8:1), f 1. 7? 2.3, f 26.9 ?4 5.4 mm o ptional powere d zoom/focus lenses and fixed-focus lens 335 w uhm lamp 1.0 2? 10.16 m (4 0? 400 inches), 4:3 aspect ratio 6,200 lumens ( lamp power : auto / normal , dynamic mode, standard lens) 90% 5,000:1 (full on / full of f, lamp power : auto , iris on, dynamic mode ) 1,024 768 pixels f h 15.73 khz; f v 59.94 hz, f h 15.63 khz; f v 50 hz, f h 31.47 khz; f v 59.94 hz, f h 31.25 khz; f v 50 hz, f h 45.00 khz; f v 60 hz, f h 37.50 khz; f v 50 hz, f h 33.75 khz; f v 60 hz, f h 28.13 khz; f v 50 hz, f h 28.13 khz; f v 25 hz, f h 27.00 khz; f v 24 hz, f h 27.00 khz; f v 48 hz, f h 33.75 khz; f v 30 hz, f h 67.50 khz; f v 60 hz, f h 56.25 khz; f v 50 hz f h : 15.73 khz, f v : 59.94 hz [ntsc/ntsc4.43/pal-m/pal60] f h : 15.63 khz, f v : 50 hz [p al/p al-n/secam] v ertical: 50% (power ed), horizontal: 10% (power ed) note: optical a xis shift function cannot be operated when used with the et -el w21. v ertical: 40 (with vertical c orr ection only) horizontal: 30 (with horizontal c orr ection only) ceiling/floor , fr ont/re ar 3.7 cm (1-15/32 inches) (r ound) 1 10 w (monaural) specifications 480i ( 525i): 576i ( 625i): 480p (525p): 576p (625p): 720 (750)/60p: 720 (750)/50p: 1080 (1125)/60i: 1080 (1125)/50i: 1080 (1125)/25p: 1080 (1125)/24p: 1080 (1125)/24sf: 1080 (1125)/30p: 1080 (1125)/60p: 1080 (1125)/50p: 786,432 (1,024 7 68) 3, total of 2,359,296 pixels 20.0 mm ( 0.79 inches) diagonal (4:3 aspect ratio) f h : 15? 100 khz, f v : 24? 120 hz, dot clock: up to 162 mhz fh: 15?100 khz, fv: 24?120 hz, dot clock: 25 mhz?162 mhz (vga: 640 480 pixels to wuxga: 1,920 1,200 pixels, vesa cvt-rb compliant, compatible with hdcp) 495 w (0.3 w with st andbym ode set to eco * 1 , 10 w with standby mode set to normal, 37 w with in standby mode of audio setting set to on.) as of august 2014 2/16 PT-EX610/ex610l lcd projectors sfl14m018
te r minals hdmi in dvi-d in rgb1 in r, g, b rgb2 in r, g, b y, p b (c b ), p r (c r ) video in monitor out audio in v ariable audio out serial in remote 2 in hdmi 19-pin 1, deep color, hdcp c ompatible 480i(525i) * 3 , 576i(625i) * 3 , 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sf, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p audio signal: linear pcm (sampling fr equencies: 48 khz, 44.1 khz, 32 khz) displayport in dp-20p 1, 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sf, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p audio signal: l inear pcm (sampling fr equencies: 48 khz, 44.1 khz, 32 khz) dvi-d 24-pin 1, dvi 1.0 c ompliant, c ompatible with hdcp , c ompati- ble with single link only 480i(525i) * 3 , 576i(625i) * 3 , 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sf, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p vga (640 400) ? wuxga* 4 (1,920 1,200) vga (640 400) ? wuxga* 4 (1,920 1,200) d-sub hd 15-pin (female) 1 r: 0.7 vp-p, 75 ohms; g: 0.7 vp-p (1.0 vp-p for sync on g), 75 ohms; b: 0.7 vp-p, 75 ohms; hd/vd, sync: high impedance, ttl (positive/negative) note: sync/hd a nd vd terminals do not accept tri-level sync signals. bnc 5 (rgb/yp b p r /y c b c r 1 ) r: 0.7 vp-p, 75 ohms; g: 0.7 vp-p (1.0 vp-p for sync on g), 75 ohms; b: 0.7 vp-p, 75 ohms; hd/vd, sync: high impedance, ttl (positive/negative) note: sync/hd a nd vd terminals do not accept tri-level sync signals. y: 1.0 vp-p (including sync signal); p b (c b ), p r (c r ): 0.7 vp-p, 75 ohm s vp-p; c: 0.286 vp-p, 75 ohms y, p b (c b ), p r (c r )y : 1.0 vp-p (including sync signal); y: 1.0 p b (c b ), p r (c r ): 0.7 vp-p, 75 ohm s d-sub hd 15-pin (female) 1 r: 0.7 vp-p, 75 ohms; g: 0.7 vp-p (1.0 vp-p for sync on g), 75 ohms; b: 0.7 vp-p, 75 ohms; hd/vd, sync: high impedance, ttl (positive/negative) m3 (l, r) 1, 0.5 v rms, input impedance: 22 kilohms or mor e m3 (l, r) 1, 0.5 v rms, input impedance: 22 kilohms or mor e pin jack (l, r) 2, 0.5 vr ms, input impedance: 22 kilohms or more m3 (l, r) 1 ( monitor out: 0? 2.0 vr m s, variable) d-sub 9-pin (female) 1, for e xtern al c ontr ol ( rs-232c c ompliant) d-sub 9-pin (female) 1, for e xtern al c ontr ol (p arallel) remote 1 in m3 jack 1 for wir ed re mote c ontr ol c onnection, 100base-tx, compliant with pjlink? (class 1), d eep color, compatible with hdcp, 480i(525i) * 3 , 576i(625i) * 3 , 480p(525p), 576p(625p), 720(750)/60p, 720(750)50p, 1080(1125)/60i, 1080(1125)/50i, 1080(1125)/25p, 1080(1125)/24p, 1080(1125)/24sf, 1080(1125)/30p, 1080(1125)/60p, 1080(1125)/50p vga (640 400) ? wuxga* 4 (1,920 1,200), dot c lock: 25 mh z? 162 mhz note: compatible with non-interlaced signals only . lan/digital link rj-45 1f or network and digital link (video/network/serial control) pin jack 1, 1.0 vp-p, 75 ohms s-video in hdcp compatible vga (640 400)?wuxga * 4 (1,920 1,200) y: 1.0 vp-p (including sync signal); pb (cb), pr (cr): 0.7 vp-p, 75 ohms as of august 2014 3/16 PT-EX610/ex610l lcd projectors sfl14m018
we ights a nd dimensions shown ar e a ppr oximate. specifications a nd a ppearance ar e subject to change without notice. * 1 when the standby mode is set to eco, network functions such as power on over the l an n etwork will not operate, and the serial output termi - nal cannot be used. also, only certain c ommands can be r eceived for exte rn al contr ol using the serial terminal. only taiwan mod e l, 0.15 w. * 2 measur ement, m easuring c onditions, a nd method of notation a ll c omply with iso 21118 inter national s tandar ds. * 4 wuxga * 3 only compatible with dot clock frequency of 27 mhz (pixel repetition signal) re solution is supported only when the signals ar e compliant with vesa cvt - rb (coor dinated v ideo timing-reduced blanking). * 5 with * 6 average value. may differ depending on models. legs at shortest position. * 8 operation * 7 the operating temperature range is 0 c to 40 c (32 f to 104 f) when used at altitudes between 1,400 m and 2,700 m (4,593 f t to 8,858 ft) above sea level. when operating temperature exceeds 40 c (35 c at high altitude), lamp power may automatically switch to eco in order to protect the projector. range dif fers depending on e nvir onments. o peration noise* 2 o perating temperatur e o perating humidity remote contr ol u nit power supply o peration r ange* 8 dimensions (w h d) w eight supplied accessories 35 db ( lamp power : normal ), 0? 45 c * 7 (32? 113 f) * 7 10%? 80% (no c ondensation) 3 v dc (r03/lr03/aaat ypeb attery 2) appr ox. 30 m (98 ft 5 in) when operated fr om dir ectly in fr ont of the signal r eceptor 48 145 27 mm (1-7/8 5-23/32 1-1/16 inches) appr ox. 102 g (3.6 oz) (including batteries) power cord (including power cord holder )( 1) wir eless/wire led re mote c ontr ol unit ( 1) batteries for re mote c ontr ol (aaa/r03/lr03 type 2) softwar e cd-rom (logo t ransfer software , m ulti pr ojector monitoring & contr ol softwar e) ( 1) power cor d length cabinet materials dimensions (w h d) pt -ex610 pt -ex610l w eight * 6 pt -ex610 pt -ex610l 3.0 m (9 ft 10 in) molded p lastic 530 177* 5 445m m (20-7/8 6-31/3 2* 5 17-17/32i nches) ( with supplied lens) 530 177* 5 385m m (20-7/8 6-31/32 * 5 15-5/32 inches) ( without lens) appr ox. 10.6 kg (23.4 lbs) ( with supplied lens) appr ox. 9.8 kg (21.6 lbs) (without lens) 29 db ( lamp powe r : eco ) * 9 if the ceiling mount bracket of the et-pke200h or et-pke200s has already been installed, use the projector attachment for the et-pke200b. ceiling mount bracket bracket assembly replacement lamp unit replacement filter unit et -pkd120h (for high ceilings) et -pkd120s (for l ow ceilings) et-pke300b (for et-pkd120h/pkd120s) et-pke200b * 9 et -lae300 et -rfe300 optional accessories short throw zoom lens ( 0.78-0.98:1 wuxga / 0.78-0.98:1 wxga / 0.8-1.0:1 xga) et -el w22 zoom lens (1.3?1.7:1) zoom lens (2.8? 4.6:1) zoom lens (4. 6? 7.2:1) fixed-focus lens (0.8:1) et -el w20 et -el t20 et -el t21 et -el w21 as of august 2014 4/16 PT-EX610/ex610l lcd projectors sfl14m018
d imensions unit : mm (inch) n ote: this illustration is not drawn to s cale. the illustration shows the pt - ex610. t erminals 1 8 9 10 11 13 14 15 12 23 45 67 1 lan/digital link connector 2 hdmi input 3 monitor output 4 rgb1 input 5 rgb2 input 6 bvi-d input 7 display port input 8 video input 9 audio 1 input 10 audio 2 input 11 audio 3 input 12 remote 1 input 13 audio output 14 serial input 15 remote 2 input 385 (15-5/32) 530 (20-7/8) 445 (17-17/32) 160 (6-5/16) 177 (6-31/32) 80 (3-5/32) 17 (21/32) 60 (2-3/8) as of august 2014 5/16 PT-EX610/ex610l lcd projectors sfl14m018
standa rd setting-up position caution : ? all construction work should be done by a qualified technician. ? when mounting to the ceiling, use the special mounting bracket. to pr event the pr ojector fr om swaying or dr op- ping, attach the wir e between the mounting bracket and the ceiling. unit : mm (inch) n ote: i llustrations show the pr ojector i nstalled u sing optional ceiling mount bracket et - pkd120h and bracket a ssembly et - pke300b. this illustration is not drawn to s cale. uppe r e dge of project ed imag e l owe r e dge of project ed imag e proje ct ed i mag e l l l proje ct ed i mag e h h (2 -3 /8 ) 100 (3-15/16) 100 (3-15/ 16) 200 (7- 7/ 8) 100 (3-15/16) 100 (3- 15/16) 200 (7-7/8 ) 352? 432* 2 (13 - 27/32 ? 17) * 2 (17 -7 /16? 20-19/32)* 2 443? 523* 2 ( 7-11/16) a* 1 ( 7-15/32) *1 when the lens protrudes to the maximum. a: 50 mm (1-31/32 in) wi th the et-elw21 95 mm (3-3/4 in) wi th the et-el w2 2 79.5 mm (3-1/8 in) wi th the et-el w2 0 60 mm (2-3/8 in) wi th the supplied lens 84 mm (3-5/16 in) wi th the et-elt20 80 mm (3-5/32 in) wi th the et-elt21 *2 a djustable in 40 mm (1-9/16 in) steps. ? 60.5 195 190 as of august 2014 6/16 PT-EX610/ex610l lcd projectors sfl14m018
pr ojection distance for 4:3 aspect ratio scr een ?t he value for l (distance to scr een) varies slightly within 5% depending on the zoom lens characteristics. ?t he zoom lens characteristics may cause slight image distortion. ?w hen vertical keystone corr ection is u sed, the image is corr ected in the dir ection that re duces its pr ojected size. ?t he brightness varies depending on the zoom setting. n ote: when the fixed-focus lens et -el w21 is mounted, the optical lens shift function cannot be used. unit: feet unit: meters 0.97 1.14 1.30 1.47 1.64 1.98 2.49 3.33 4.18 5.02 5.87 6.71 3.2 3.7 4.3 4.8 5.4 6.5 8.2 10.9 13.7 16.5 19.3 22.0 4.0 4.7 5.4 6.0 6.7 8.1 10.2 13.6 17.0 20.5 23.9 27.4 1.21 1.42 1.63 1.84 2.05 2.47 3.10 4.15 5.19 6.24 7.29 8.34 ? ? ? ? ? ? ? ? ? ? ? ? ? 0.97 1.23 1.49 1.74 2.00 2.26 2.51 3.03 3.80 5.08 6.37 7.65 8.94 10.22 1.35 1.70 2.05 2.40 2.75 3.10 3.45 4.15 5.20 6.95 8.70 10.45 12.20 13.95 1.30 1.64 1.98 2.32 2.66 3.00 3.33 4.01 5.03 6.72 8.42 10.11 11.81 13.50 2.26 2.83 3.41 3.98 4.56 5.14 5.71 6.86 8.59 11.47 14.35 17.23 20.11 22.99 2.19 2.77 3.34 3.92 4.50 5.07 5.65 6.80 8.53 11.41 14.30 17.18 20.06 22.94 3.65 4.59 5.53 6.47 7.41 8.35 9.29 11.17 14.00 18.70 23.40 28.11 32.81 37.51 3.56 4.50 5.44 6.38 7.32 8.27 9.21 11.09 13.92 18.63 23.34 28.05 32.76 37.47 5.78 7.27 8.77 10.27 11.77 13.26 14.76 17.75 22.24 29.73 37.21 44.70 52.18 59.67 0.60 0.77 0.93 1.10 1.26 1.43 1.59 1.92 2.42 3.24 4.07 4.89 5.72 6.54 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.61 0.76 0.91 1.07 1.22 1.37 1.52 1.83 2.29 3.05 3.81 4.57 5.33 6.10 0.30 0.38 0.46 0.53 0.61 0.69 0.76 0.91 1.14 1.52 1.91 2.29 2.67 3.05 3.2 4.0 4.9 5.7 6.6 7.4 8.2 9.9 12.5 16.7 20.9 25.1 29.3 33.5 4.4 5.6 6.7 7.9 9.0 10.2 11.3 13.6 17.0 22.8 28.5 34.3 40.0 45.8 4.3 5.4 6.5 7.6 8.7 9.8 10.9 13.2 16.5 22.1 27.6 33.2 38.7 44.3 7.4 9.3 11.2 13.1 15.0 16.9 18.7 22.5 28.2 37.6 47.1 56.5 66.0 75.4 7.2 9.1 11.0 12.9 14.8 16.6 18.5 22.3 28.0 37.4 46.9 56.4 65.8 75.3 12.0 15.1 18.1 21.2 24.3 27.4 30.5 36.7 45.9 61.3 76.8 92.2 107.6 123.1 11.7 14.8 17.8 20.9 24.0 27.1 30.2 36.4 45.7 61.1 76.6 92.0 107.5 122.9 19.0 23.9 28.8 33.7 38.6 43.5 48.4 58.2 73.0 97.5 122.1 146.7 171.2 195.8 2.0 2.5 3.1 3.6 4.1 4.7 5.2 6.3 7.9 10.6 13.3 16.0 18.8 21.5 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.0 2.5 3.0 3.5 4.0 4.5 5.0 6.0 7.5 10.0 12.5 15.0 17.5 20.0 1.0 1.3 1.5 1.8 2.0 2.3 2.5 3.0 3.8 5.0 6.3 7.5 8.8 10.0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? 1.02 1.27 1.52 1.78 2.03 2.29 2.54 3.05 3.81 5.08 6.35 7.62 10.16 screen size (diagonal) min. max. min. max zoom z oom lenses fi xed-focus fixed- focus lens et-elw21 distance to screen (l) height from the edge of screen to center of lens (h) min. max. supplied lens min. [m] [in] max. et -el w20 zoom lens et -el t20 zoom lens et -elt 21 z oom lens et -el w21 fi xed-focus lens 40 50 60 70 80 90 10 0 12 0 15 0 20 0 25 0 30 0 400 / / / / / / / / / / / / / 8.89 350 / 1.02 1.27 1.52 1.78 2.03 2.29 2.54 3.05 3.81 5.08 6.35 7.62 10.16 screen size (diagonal) min. max. min. max zoom z oom lenses fi xed-focus fixed- focus lens et-elw21 distance to screen (l) height from the edge of screen to center of lens (h) min. max. supplied lens min. [m] [in] max. et -el w20 zoom lens et -el t20 zoom lens et -elt 21 z oom lens et -el w21 fi xed-focus lens 40 50 60 70 80 90 10 0 12 0 15 0 20 0 25 0 30 0 400 / / / / / / / / / / / / / 8.89 350 / z oom lenses et-elw22 z oom lenses et-elw22 ? ? 0.14? 0 .78 0.16? 0 .91 0.18? 1 .04 0.21? 1 .17 0.23? 1 .30 0.27? 1 .55 0.34?1. 94 0.46? 2 .59 0.57? 3 .24 0.69? 3 .89 0.80? 4 .53 0.91? 5 .18 0.4? 2.5 0.5? 3.0 0.6? 3.4 0.7? 3.8 0.8? 4.2 0.9? 5.1 1.1? 6.4 1.5? 8.5 1.9? 10.6 2.3? 12.7 2.6? 14.9 3.0? 17.0 ? ? min. max. et -el w22 zoom lens ? ? ? ? min. max. et -el w22 zoom lens ? ? ? ? as of august 2014 7/16 PT-EX610/ex610l lcd projectors sfl14m018
c alculation of the pr ojection distanc e f or a scr een size dif fer ent fr om the above, use the equation below to calculate t he pr o jection distance. ? distances calculated w ith the a bove e quations w ill include a slight er ro r. minimum l (m) = (diagonal scr een size in inches) maximum l (m) = (diagonal scr een size in inches) et -el w22 aspect ratio 4:3 0.01691 - 0.04888 0.02096 - 0.04577 minimum l (m) = (diagonal scr een size in inches) maximum l (m) = (diagonal scr een size in inches) minimum l (m) = (diagonal screen size in inches) maximum l (m) = (diagonal screen size in inches) minimum l (m) = (diagonal scr een size in inches) maximum l (m) = (diagonal scr een size in inches) minimum l (m) = (diagonal scr een size in inches) maximum l (m) = (diagonal scr een size in inches) (fixed focus) l (m) = (diagonal scr een size in inches) et -el w20 supplied lens et -el t20 et -el t21 et -el w21 0.02570 - 0.05580 0.03500 - 0.05400 0.03390 - 0.05530 0.05760 - 0.04800 0.05764 - 0.11420 0.09406 - 0.11290 0.09421 - 0.21320 0.14970 - 0.21090 0.01650 - 0.058500 as of august 2014 8/16 PT-EX610/ex610l lcd projectors sfl14m018
h (width of projected image) v (height of projected image) 0.5v 0.5v 0.1h 0.1 h standard postition of projected image shift range optical axis s hift function allows to s hift t he position of a pr o jected image as s hown below . installable angle install the pr ojector at an angle within the range s hown below . ? ve rtical dir ection t he pr o jector may be installed at a v ertical angle of 360. ? h orizontal dir e ction t he pr o jector may be i nstalled at a horizontal angle of 15. ? the et -el w21 is a fixed short-focus lens. ther efor e, the lens shift function pr ovided in the main unit cannot be used. 360 -15 +15 as of august 2014 9/16 PT-EX610/ex610l lcd projectors sfl14m018
list of c ompatible signals 15.6 50.0 15.7 59.9 27.0 27.0 27.0 27.0 15.6 50.0 31.5 60.0 31.3 50.0 45.0 60.0 74.3 74.3 74.3 74.3 74.3 74.3 74.3 74.3 37.5 50.0 33.8 60.0 28.1 50.0 28.1 25.0 27.0 27.0 24.0 48.0 33.8 30.0 67.5 60.0 148.5 148.5 56.3 50.0 37.9 85.1 31.5 31.5 70.1 25.2 31.5 25.2 59.9 35.0 66.7 30.2 37.5 75.0 31.5 31.5 37.9 72.8 43.3 85.0 36.0 35.2 56.3 36.0 37.9 60.3 40.0 46.9 75.0 49.5 48.1 72.2 50.0 53.7 85.1 56.3 49.7 74.6 57.3 39.6 50.0 51.9 48.4 60.0 65.0 56.5 70.1 75.0 60.0 75.0 78.8 65.5 81.6 86.0 68.7 85.0 94.5 81.4 100.0 113.3 98.8 120.0 139.1 53.7 60.0 81.6 64.0 70.0 94.2 67.5 74.9 108.0 77.1 85.0 119.7 68.7 75.1 100.0 display mode display resolution (dots)* 1 scanning frequency h (khz) v (khz) dot clock frequency (mhz) format 720 480i 720 576i 640 480i 768 576i 720 480i 720 576i 1280 720 1920 1080i 1920 1080 640 400 640 400 640 480 800 600 832 624 1024 768 1152 864 1152 870 15.7 15.6 15.7 59.9 50.0 59.9 ? ? 13.5 13.5 ntsc/ntsc4.43/pal-m/pal60 pal/pal-n/secam 525i (480i) 625i (576i) 525p (480p) 625p (576p) 750 (720)/60p 750 (720)/50p 1125 (1080)/60i* 3 1125 (1080)/50i 1125 (1080)/24p 1125 (1080)/24sf 1125 (1080)/25p 1125 (1080)/30p 1125 (1080)/60p 1125 (1080)/50p v esa400 vga svga mac16 xga mxga mac21 video/s-video yc b c r /rgb 720(1440) 480i* 2 720(1440) 576i* 2 525i (480i) 625i (576i) hdmi/dvi-d displayport/hdmi/ dvi-d/yp b p r /rgb displayport/hdmi/ dvi-d/rgb * 1 the ?i? a ppearing after the re solution indicates an interlaced signal. * 2o nly compatible with dot clock frequency of 27 mhz (pixel repetition signal) * 3 compliant with vesa cvt- rb (coordinated v ideo timing-reduced blanking). t he signals that can be input to this pr ojector ar e shown in the table below . horizontal s canning fr e- quencies of 15 khz to 100 khz, v ertical s canning fr equencies of 24 hz to 120 hz, and a dot clock of 162 mhz maximum can be input . note: the native re solution of this pr ojector is 1,024 768 pixels. if the display re solution of the input signal is dif fere nt fr om the native r esolution, image c ompr e ssion or expansion will be used to c onvert the input signal to a level within the n ative re solut ion. as of august 2014 10/16 PT-EX610/ex610l lcd projectors sfl14m018
display mode display resolution (dots)* 1 scanning frequency h (khz) v (khz) dot clock frequency (mhz) format 1280 720 1280 768 1280 768 1280 768 1280 800 1280 800 1280 800 1280 960 1280 1024 1366 768 1400 1050 1440 900 1600 1200 1680 1050 1920 1080 1920 1080* 3 1920 1080* 3 1920 1080* 2 1920 1200 1920 1200* 2 37.1 44.8 76.3 92.6 39.6 47.8 47.4 60.3 68.6 41.3 49.7 49.3 62.8 71.6 60.0 52.4 64.0 72.3 78.2 80.0 91.1 47.7 39.6 54.1 64.0 65.2 65.3 78.8 82.2 46.3 55.9 75.0 65.3 54.1 55.6 66.6 67.2 61.8 74.0 74.6 49.8 59.9 100.0 120.0 49.9 59.9 60.0 74.9 84.8 50.0 59.8 59.9 74.9 84.9 60.0 50.0 60.0 66.3 72.0 75.0 85.0 59.8 49.9 50.0 60.0 60.0 60.0 60.0 72.0 75.0 50.0 59.9 60.0 50.0 49.9 59.9 60.0 49.9 60.0 59.9 60.5 74.5 131.8 161.6 65.3 79.5 68.3 102.3 117.5 68.6 83.5 71.0 106.5 122.5 108.0 88.0 108.0 125.0 135.1 135.0 157.5 85.5 69.0 99.9 108.2 122.6 121.8 149.3 155.9 97.0 106.5 162.0 146.3 119.5 55.9 60.0 119.0 141.5 138.5 173.0 158.3 154.0 193.3 1280 720 1280 768 1280 800 msxga sxga 1366768 1600900 sxga+ wxga+ uxga60 wsxga+ 19201080 wuxga displayport/hdmi/ dvi-d/rgb rgb displayport/hdmi/ dvi-d/rgb rgb * 2 * 2 * 1 the ?i? a ppearing a fter the re solution indicates an interlaced signal. * 2 compliant with vesa cvt- rb (coordinated v ideo timing-reduced blanking). * 3t he image processing circuit reduces the number of pixels to display images. note: digital link and hdmi inputs share the same compatible signal. as of august 2014 11/16 PT-EX610/ex610l lcd projectors sfl14m018
serial connector t he s erial connector complies with rs-232c. to contr ol the pr o jector fr om a personal computer , c om- mands must be input thr o ugh communication s oftwar e, based on t he format and s atisfying the commu - nication conditions shown belo w. basic format t ransmission fr om the computer begins with s tx, then the id, command, parameter , and etx ar e s ent in t his or der . add parameters accor ding to the details of contr ol . c ommunication c onditions (factory setting) p in assignments and signal names 6 15 9 d-sub 9-pin (female) serial input descriptio n nc t ransmitted data received dat a connected intern ally gr ound signal name ? tx d rxd ? gnd no . 1 2 3 4 5 descriptio n nc connected intern ally connected intern ally nc signal name ? ? no . 6 7 8 9 caution ?i t may not be possible to send or re c eive commands for about 10 to 60 seconds w hen the lamp is first tur ned on. if this occurs , wait for 60 sec- onds, then try sending or re c eiving again. ? when sending multiple commands, be sur e to wait for at least 0.5 second after re ceiving a re s ponse fr om the pr ojector befor e s ending the next command. ?a d ditional time is sometimes re q uir ed for r esponse due to pr ocessing inside the pr ojector . set the time-out period for command re sponse to 10 seconds or more . ? when using two or more units, set diff er ent ids for each unit. start (1 byte) end (1 byte) colo n (1 byte) semicolon (1 byte) (2 byte) id designator 01 to 64: address number id: 2 characters (2 bytes) parameters (undefined length) command (3 bytes) ( control and/or query commands) st x etx c1 p1 p2 ... pn c2 ad i1 i2 c3 : ; signal level synchr onization metho d baud rat e parit y character length stop bit x parameter s parameter rs-232c-compliant start-stop synchro nizatio n 9,600 bps none 8 bits 1 bit none none rts cts as of august 2014 12/16 PT-EX610/ex610l lcd projectors sfl14m018
c ontr ol commands command: parameterf u nction callbac k c able specifications * do not send pon, p of or osh c ommands c ontinuously in a short period of time. d oing so m ay burst the lamp or shorten the lamp r e placement cycle. * when a c ommand that cannot be executed during standby mode is sent, the pr ojector will send an er401 command in re ply . pon pof osh:0 osh:1 iis:dl1 iis:dp1 iis:hd1 iis:dvi iis:rg1 iis:rg2 iis:vid vxx:ryc2=+00000 vxx:ryc2=+00001 vxx:ryc2=+00002 vxx:lpwi1=+00030 vxx:lpwi1=+00001 vxx:lpwi1=+00000 oas vse:0 vse:1 vse:2 vse:5 vse:6 vse:9 vse:10 vpm:nat vpm:std vpm:dyn vpm:cin vpm:dic standby power shutter input selection rgb2 input setting lamp power auto setup aspect picture on off off on digitallink displayport hdmi d vi-d rgb1 rgb2 video rgb/yp b p r s-video video auto normal eco normal/auto/vid auto 4:3 wide real full h-fits v-fits natural standard dynamic cinema dicom simulation pon pof osh:0 osh:1 iis:dl1 iis:dp1 iis:hd1 iis:dvi iis:rg1 iis:rg2 iis:vid vxx:ryc2=+00000 vxx:ryc2=+00002 vxx:ryc2=+00001 vxx:lpwi1=+00030 vxx:lpwi1=+00001 vxx:lpwi1=+00000 oas vse:0 vse:1 vse:2 vse:5 vse:6 vse:9 vse:10 vpm:nat vpm:std vpm:dyn vpm:cin vpm:dic as of august 2014 13/16 PT-EX610/ex610l lcd projectors sfl14m018
status r equest c ommands comman d:p arameter functio nd escription callback c ommand e xample to s et t he s hutter function o n, s end the command as shown belo w. adzz osh :1 ;e tx stx n ote: when sending c ommands w ithout parameters, a c olon (:) is not n ecessary . * 1 p 1p2p3p4 = celsius (c), p 5p6p7p8 = f ahr enheit (f) note: if a wr ong command is r eceived, the pr ojector will send an er401 or e r402 command to the computer . qpw qsh qin qvx:lpwi1 qse qpm qst q$l:1 qtm:0 qtm:1 main power status shutter function status input signal status lamp power mode status aspect mode status picture mode status projector run time lamp run time temperature status 000 001 0 1 dl1 dp1 hd1 dvi rg1 rg2 vid vxx:lpwi1=+00030 vxx:lpwi1=+00001 vxx:lpwi1=+00000 0 1 2 5 6 9 10 nat std dyn cin dic p1p2p3p4p5 p1p2p3p4 p1p2p3p4/p5p6p7p8 * 1 p1p2p3p4/p5p6p7p8 * 1 off on off on digitallink displayport hdmi dvi-d rgb1 rgb2 video auto normal eco normal/auto/vid auto 4:3 wide real full h fit v fit natural mode standard mode dynamic mode cinema mode dicom simulation.mode 00000 ? 99999 hours 0000 ? 9999 hours air intake exhaust as of august 2014 14/16 PT-EX610/ex610l lcd projectors sfl14m018
n otes on pr ojector placement a nd operation t he pr o jector uses a high-wattage lamp that becomes v ery hot during operation. please observe the following pr ecautions . 1. never place o bjects on top of t he pr o jecto r. 2. make sure ther e is an unobstructed s pace of 1,000 mm (3 feet 3 inches) or mo re ar o und the pr o- jector? s exhaust openings. 3. do not s tack pr o jector units dir ectly on t op of one another for the purpose of multiple (stacked) pr ojection. when stacking pr o jector units, be su re to pr ovide the amount of space indicated below between them. these space r equir ements also apply to installations wher e only o ne pr ojector unit is o perating at o ne time and t he o ther unit is used as a backup. 4. make sure that nothing blocks the pr ojector? s air intake and exhaust o penings. also, install the pr o- jector so that c ool or hot air fr om other air conditioning equipment does not flow dir ectly towar d the pr ojector? s air intake or exhaust o penings . 5. do not install the pr ojector in an enclosed s pace. if it is necessary to install it in an enclose d s pace, add a s eparate v entilation system. if v entilation is insuf ficient, hot air will accumulate at th e intake opening. t his may cause the pr ojector? s pr otective cir cuit to interrupt pr o jector o peration. 6. if t he pr o jector is installed in an enclosed space, ensur e that the pr ojector? s intake and exhaust o penings ar e not blocked. t ake particular car e to ensur e that hot air fr om t he exhaust openings is not s ucked into the intake openings. 7. when installing t he pr o jector in any manner o ther than floor mounting with the adjuster legs, us e the four thr eaded ceiling mount holes (scr ew diameter: m6, pr o jector interior thr ead l ength: 12 mm) to s ecure t he pr o jecto r. do not stack pr ojector units dire ctly on top of one another. 1000 mm 0 (3 ft 3 in ) or more 50 0 mm (1 ft 8 in ) or more 1000 mm 0 (3 ft 3 in ) or more 10 0 mm (4 in) or more as of august 2014 15/16 PT-EX610/ex610l lcd projectors sfl14m018
operating the pr ojector continuously 1. if the pr ojector is to be operated continuously 12 hours or mor e, lamp re p lacement cycle d uration becomes shorter . 2. the lamp re p lacement cycle duration becomes shorter if the pr ojector is operated r epeatedly for short periods. di re ction of air intake a nd exhaust intake exhaust we ights a nd dimensions shown ar e a ppr oximate. specifications a nd a ppearance ar e subject to change without notice. pr oduct availability dif fers depending on re gion a nd c ountry . this pr oduct m ay be subject to e xport contr ol re gulations. displayport and the displayport logo are trademarks or registered trademarks of the video electronics standards association. p hdmi, the hdmi logo and high-definition multimedia interface are trademarks or registered trademarks of hdmi licensing llc in the united states and other countries. jlink is a re gister ed trademark, or a trademark a pplication has b een filed, in japan, the u nited s tates, and other countries an d re gions. all other trademarks ar e the pr operty of their re spective trademark owners. as of august 2014 16/16 PT-EX610/ex610l lcd projectors sfl14m018

▲Up To Search▲

Price & Availability of PT-EX610

	To Download PT-EX610 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .